3D打印技术在建筑领域又再创新高。一间上海公司winsun装饰设计工程有限公司，继完成10座可回收混凝土材料房子之后，又创建了六层高的组装式住宅楼。单座建筑面积达1100平方米。这个大尺度的建筑是由一个高7米、宽10米、长40米的离线机器制造的一件件零件组成的，生产后在苏州工业园区进行组装。
有木有想住进去的冲动啊？但是问题来了，这房屋有木有地基，结不结实，会不会倒塌.......关键的是，它的价格是百姓价格吗？
While architectural firms compete with their designs for 3D-printed dwellings, one company in China has quietly been setting about getting the job done. In March of last year, company WinSun claimed to have printed 10 houses in 24 hours, using a proprietary 3D printer that uses a mixture of ground construction and industrial waste, such as glass and tailings, around a base of quick-drying cement mixed with a special hardening agent. Now, WinSun has further demonstrated the efficacy of its technology -- with a five-storey apartment building and a 1,100 square metre (11,840 square foot) villa, complete with decorative elements inside and out, on display at Suzhou Industrial Park. The 3D printer array, developed by Ma Yihe, who has been inventing 3D printers for over a decade, stands 6.6 metres high, 10 metres wide and 40 metres long (20 by 33 by 132 feet). This fabricates the parts in large pieces at WinSun's facility. The structures are then assembled on-site, complete with steel reinforcements and insulation in order to comply with official building standards. See more at: http://upriser.com/posts/world-s ... thash.T45hbHIy.dpuf
| 欢迎光临 3D打印网|3D打印高分子材料|3D打印论坛|3D打印技术资讯 (http://www.mogooto.com/) | Powered by Discuz! X3.2 |